Re: Cutting stainless media

"Tom Wait" <tomwait308landmine@[EMAIL PROTECTED]
> wrote in message 
news:KnMPj.195$506.96@[EMAIL PROTECTED]
>> -Scott

---------------------------snip--------------------------------
.. I don't think you'll have
> much luck with an abrasive chop saw either. A cold saw would work but 
> that's
> an expensive tool. You're not going to want to buy one for this job. The
> plasma cutter might be your best bet if you can live with the roughess. 
> Good
> luck and let us know what you do.
> Tom
>

Chop saw will work just fine, I use one all the time to cut stainless...
Trick is to use just gentle pressure with the HF saws to keep from burning

up the brushes too quickly..
The Aluminum Oxide in the cutting wheels will walk right through 
Stainless...

Putt...