> Anyone have any clues (or experience) with what the problem might be
> here? Sure would appreciate any
> help getting rid of those dead spots (there's so little light left
> coming out to begin with, I can't afford to lose
> any more due to poor focus!).
>
> Thanks,
> Howard
The LCL of the former FEL is 60.3mm (or so the book says) and the
output is 27,500 lumens, while the LCL of the HX600 (aka FLK) is
60.5mm and the output is 16,500 lumens. The first thing to do is push
the lamp straight in about 1/8". I've ****mmed under lampholders in
severe cases and you may have to here, depending on the adjustment
available. But as mentioned, the output is about 1/2 the original
but you should be able to get it flat.
Cheers,
Lloyd
|
